✓For homeowners & professionals
Free to use No sign up required Transparent calculations
Give us feedback

Disclaimer

Effective Date: 8 September 2026
Last Updated: 8 September 2026

The information, calculators, tools, charts, diagrams, guides and other resources provided on RoofPitchCalculator.org are intended for general informational, educational and calculation purposes only.

RoofPitchCalculator.org is personally owned and operated by:

Daniel Brooks
Civil Engineer · Founder
RoofPitchCalculator.org

By using this Website, you acknowledge and agree to the limitations described in this Disclaimer.

1. General Information Disclaimer

RoofPitchCalculator.org provides online tools and educational information relating to topics such as:

We aim to make this information useful, clear and mathematically accurate.

However, Website content is general in nature and does not take into account the specific design, condition, location, construction method or requirements of your property or project.

You should not rely on this Website as the sole basis for an important construction, structural, regulatory or safety decision.

2. No Professional Engineering Advice

Although RoofPitchCalculator.org is operated by Daniel Brooks, Civil Engineer and Founder, information provided through this Website does not constitute personalised engineering services.

Use of the Website does not create:

The calculators and guides are provided as general tools and educational resources.

For project-specific structural engineering, construction design or safety advice, consult an appropriately qualified professional who can inspect and assess the actual project conditions.

3. Calculator Results Are Estimates

Our calculators use mathematical formulas based on the values entered by the user.

We aim to calculate those values correctly, but the result is only as reliable as:

A mathematically correct calculation can still produce a result that does not accurately represent the real roof if the wrong measurements or assumptions are used.

4. User Measurements

You are responsible for the measurements you enter into the Website.

RoofPitchCalculator.org cannot independently verify:

For example, a symmetrical gable roof may use half the full span as the run, while a mono-pitch roof generally uses the full horizontal span between its low and high reference points.

Using the wrong run may produce a mathematically correct answer for the wrong roof geometry.

5. Mathematical Accuracy vs Real-World Accuracy

There is an important difference between calculation accuracy and real-world accuracy.

The calculator may correctly evaluate:

Angle=tan⁡−1(RiseRun)\text{Angle}=\tan^{-1}\left(\frac{\text{Rise}}{\text{Run}}\right)

but that does not confirm that the rise and run entered accurately describe the real building.

Real buildings may include:

You should independently verify important measurements before making decisions based on the result.

6. Rafter Length Disclaimer

Where our Website calculates rafter length, the result generally represents the geometric straight-line distance along the slope based on the input rise and run.

It should not automatically be used as a final timber cutting dimension.

Actual rafter construction may require adjustments for:

Use approved construction drawings or qualified professional advice when determining final cutting and installation dimensions.

7. Roof Area Disclaimer

Where the Website calculates roof area or uses a roof pitch multiplier, results are geometric estimates.

They may not automatically include:

For complex roofs, each roof plane may need to be measured and calculated separately.

Do not rely on a basic roof-area calculation as a final material-ordering quantity without appropriate checks.

8. Roof Pitch Multiplier Disclaimer

A roof pitch multiplier accounts for the relationship between horizontal projection and sloping distance or surface area.

It does not automatically account for all features of a real roof.

The multiplier should be treated as a geometric calculation tool rather than a complete roofing quantity-survey method.

9. Roofing Material Disclaimer

RoofPitchCalculator.org may discuss general roof pitch ranges or provide examples involving roofing materials.

This information does not confirm whether a specific roofing product is suitable for your roof.

Minimum slope and installation requirements can vary depending on:

Always check the current technical documentation supplied by the manufacturer of the exact roofing product or system being used.

Manufacturer instructions should take priority over general information presented on this Website.

10. Building Codes and Regulations

Building codes, construction regulations and planning requirements vary by jurisdiction and can change over time.

RoofPitchCalculator.org does not guarantee that information on the Website reflects every requirement applicable to:

A calculator result is not:

You are responsible for checking the rules that apply to your project.

11. Structural Safety Disclaimer

Roof pitch is only one part of roof design.

Our calculators do not determine matters such as:

Do not use roof pitch alone to make structural design decisions.

Structural design should be carried out or checked by an appropriately qualified professional where required.

12. Safety Disclaimer

Do not climb onto a roof or place yourself at risk simply to obtain measurements for this Website.

Roof measurement may involve hazards including:

Where possible, use safer alternatives such as:

If a measurement cannot be obtained safely, do not attempt it without appropriate skills, equipment and safety procedures.

13. Construction and DIY Disclaimer

Content on RoofPitchCalculator.org should not be interpreted as encouragement to perform construction or roofing work beyond your skills, qualifications or legal authority.

Certain roofing or structural work may require:

You are responsible for determining what is required for your project.

14. Educational Content

Our articles, examples, charts and guides are intended to help users understand roof geometry and common calculation methods.

Worked examples are illustrative.

A worked example using a 6:12 roof, for instance, does not mean that 6:12 is appropriate for your particular building or roofing system.

15. No Guarantee of Completeness

We make reasonable efforts to keep our content useful and accurate.

However, we do not guarantee that every page will always be:

Information may become outdated because of changes in:

16. Errors and Corrections

Despite reasonable care, Website content or calculations may occasionally contain:

If you believe you have found an error, please contact us or use our feedback form.

Email: support@roofpitchcalculator.org

We appreciate reports that help us improve our tools and content.

17. Website Availability

We do not guarantee uninterrupted access to RoofPitchCalculator.org.

The Website may occasionally be unavailable due to:

You should not rely on the Website as the sole location for storing important project information.

18. Third-Party Sources

Our guides may refer to or link to third-party sources such as:

We may use external sources to support or explain general information.

However, we do not control third-party content and cannot guarantee that it will remain:

Always check the current version of important third-party documentation.

19. External Links

RoofPitchCalculator.org may contain links to websites that we do not own or control.

We are not responsible for their:

Following an external link is at your own discretion.

20. Google Analytics and Search Console

RoofPitchCalculator.org uses services including Google Analytics 4 and Google Search Console to understand Website performance, search visibility and general visitor behaviour.

These tools do not determine or modify calculator results.

For information about data collection and cookies, please read our:

Privacy Policy
/privacy-policy/

and

Cookie Policy
/cookie-policy/

21. Advertising Disclaimer

RoofPitchCalculator.org may display advertising now or in the future.

Advertising does not determine:

The presence of an advertisement should not be interpreted as professional endorsement of a product or service unless we specifically state otherwise.

22. Affiliate Disclaimer

RoofPitchCalculator.org may introduce affiliate links in the future.

If we receive a commission from a qualifying purchase, appropriate disclosure will be provided where required.

An affiliate relationship does not mean that a product is suitable for every user or project.

You remain responsible for evaluating products and services before purchasing or using them.

23. No Warranty

To the maximum extent permitted by applicable law, RoofPitchCalculator.org and its content are provided on an:

“as is” and “as available” basis.

We do not make an absolute warranty that:

Nothing in this Disclaimer limits rights that cannot lawfully be excluded.

24. Limitation of Liability

To the maximum extent permitted by applicable law, RoofPitchCalculator.org and Daniel Brooks will not be liable for indirect, incidental, consequential, special or similar losses arising from use of or reliance on the Website.

This may include losses relating to:

Nothing in this section excludes liability where exclusion is prohibited by law.

25. Your Responsibility

You are responsible for deciding whether information provided by RoofPitchCalculator.org is suitable for your intended purpose.

For important decisions involving:

you should independently verify the relevant information.

A calculator can assist with mathematics. It cannot inspect your building, assess hidden conditions or make a complete professional judgement about your project.

26. Professional Verification

Where a calculation may affect construction, safety or regulatory compliance, we recommend having the relevant measurements and results reviewed by an appropriately qualified person.

Depending on the project, this may include:

The appropriate professional will depend on the type and location of the project.

27. Changes to This Disclaimer

We may update this Disclaimer as:

The Last Updated date at the top of this page will show when the Disclaimer was most recently revised.

28. Related Policies

You may also wish to review:

Privacy Policy
/privacy-policy/

Cookie Policy
/cookie-policy/

Copyright / DMCA Policy
/dmca-policy/

Disclaimer

/disclaimer/

29. Contact Us

If you have a question about this Disclaimer or believe that information on RoofPitchCalculator.org requires correction, please contact:

Daniel Brooks
Civil Engineer · Founder
RoofPitchCalculator.org

Email: support@roofpitchcalculator.org